WaxMelters

Head-Exterior Casing: Features 304 grade stainless steel head which is heat, impact, chemical, and moisture resistant, while offering structural stability

4 Stainless Steel Valves with Viton® seals and 1/8" nozzles for superior performance and extended life.

Timer: Enclosed in high-impact resistant, thermoplastic NEMA 4X watertight, corrosion-resistant housing is rated for outdoor use. Timer can be programmed with one of four different functions, including switch-on impulse and cycling settings for ON and OFF cycles. LED display.

Control Box & Digital Temperature Control: allow you to accurately and precisely control and regulate your heating from -0° to 212° F/ 100° C. Built in fuses, saftey features and self-regulating heating ensure safety and long use.

Digital temperature controll is easy to read and use and features a Liquid Crystal Display (LCD) to provide accurate, precise heating from -0° to 212° F/ 100 ° C, light-emitting diode (LED) to indicate On/Off status, easy fingertip-touchpad which has lockable feature and allows easy set up and adjustment of control setpoint, differential, and other functions, and is enclosed in high-impact resistant, thermoplastic NEMA 1X surface-mount enclosure. Also features single-stage, electronic temperature control with a Single-Pole, Double-Throw (SPDT) output relay and lockable front-panel touchpad for setup and adjustment, wide temperature differential adjustment range (1 to 30° F) to allow the user to set a precise (1° F) temperature differential from 1 to 30F°, adjustable anti-short cycle delay (0 to 12 Minutes in 1-Minute Increments) ensures that the output relay remains off for a user-set time delay, which helps avoid hard starts, nuisance overload outages, and unnecessary equipment wear.

Thermo Pump Colossus is stainless steel with heated, insulated stainless steel casing has 1" output and is rated at a maximum of 28 gallons per minute.

Colossus Thermo Hose: TWO 12foot stainless steel braided, smooth bore Teflon® hose tubing is almost 50% thicker for safer chemical and heat transfer, faster transfer speeds and longer term use. At 250 Watts with self-regulating, high energy efficient coils, our new hoses can heat up more than 2 times faster than our former hoses and use less electricity. Newly designed, custom hose is triple insulated with a new safety sleeve which makes it lightweight and flexible, yet perfect for SAFE, FAST & Energy Efficient Heating. Our hoses are rated for continuous exposure temperatures of 250° F (121°C), but since our digital controllers limit temperature to a maximum of 212° F (100°C), degrees you have even extra protection and extended life. Hoses are wired with parallel circuit, low watt density electric heating with a conductive polymer core that with our sensors regulate heat output to prevent overheating, hot spots or causing burn outs in response to changes in surface and ambient temperatures. All hoses have a dielectric strength over 2000 volts and have internal stainless steel overbraid for additional mechanical protection and a low resistance path to ground as required by NEC 427-23.

ELECTRICAL: If on full capacity: 120V/60HZ, 1000 Watts, 8.5 Amps.

100 pounds