Home > MELTING TANKS > Investment Casting- Lost Wax Casting Melters

World's Fastest, Even Heating, Energy Efficient, Digitally Controlled Investment Casting- Lost Wax Casting Melters

PRIMO wax melting tanks are used to melt the wax used in investment casting- lost wax casting. Usually, the investment casting wax is heated and melted to 180-190F/82-87C and then this molten wax is poured into a mold to create a wax pattern in the exact shape of the item to be cast, even complicated shapes that would be difficult or impossible with other casting methods. This wax pattern is then coated with a slurry (usually ceramic, plaster, or plastic) to make a mold. The wax is then melted out of the mold and molten metal is poured into the cavity. The metal solidifies and the mold is broken or blasted off, producing a metal casting with thin walled, complex and intricate shapes and excellent tolerances.

All PRIMO MELTERS FEATURE:
  • Fast, Safe & Precise Melting Of All Investment Casting Waxes Used To Pour Into A Mold To Create A Wax Pattern To Be Cast.
  • 100% US Steel Free From Mercury, Lead & Radiation.
  • Round Inner Surface is High-Grade, US 304 Stainless Steel with #4 Finish so it is easy to clean, rust proof and will provide years of service.
  • No Replacement Heaters or Water Needed: Permanent Heating Elements.
  • Double-Walled & Fully Insulated Melting Tank Keeps Melter Hot Inside And Cool Outside.
  • Includes Stainless Steel Lid, 1" (2.54cm) Brass Ball Valve and Heated Spout/Valve For Clog Free Operation.
  • 1 Year Warranty & Fantastic Customer Service On All Wax Melters.
Melting Tanks In Stock & Ready To Ship
PRIMO wax melting tanks are used to melt the wax used in investment casting- lost wax casting. Usually the investment casting wax is heated and melted to 180-190F/82-87C and then this molten wax is then poured into a mold to create a wax pattern of the part to be cast. This wax pattern is then coated with a slurry (usually ceramic, plaster, or plastic) to make a mold. The wax is then melted out of the mold and molten metal is poured into the cavity. The metal solidifies and the mold is broken or blasted off, producing a metal casting with thin walled, complex and intricate shapes and excellent tolerances.