Precisely Measured, Automated "On" & "Off" Wax Dispensing
Ideal for controlled, fast, heated filling of .02oz to 20oz containers
Head-Exterior Casing: Features 304 grade stainless steel head which is heat, impact, chemical, and moisture resistant, while offering structural stability.
Head- Valve: Stainless steel UL-Listed heated valve is NEMA 4 Protection Class (rated for outdoor use) with 1/4" nozzle. Stainless steel contrustion with Viton™ seals insure extended life.
Timer: Enclosed in high-impact and corrosion resistant 304 grade stainless steel and can be programmed with 4 different functions, including switch-on impulse and cycling settings for ON and OFF cycles. LED display.
Control Box & Digital Temperature Control: allow you to accurately and precisely control and regulate your heating from -0° to 212° F/ 100° C. Built in fuses, saftey features and self-regulating heating ensure safety and long use. Digital temperature controller is easy to read and use and features a Liquid Crystal Display (LCD) to provide accurate, precise heating from -0° to 212° F/ 100 ° C, light-emitting diode (LED) to indicate On/Off status, easy fingertip-touchpad which has lockable feature and allows easy set up and adjustment of control setpoint, differential, and other functions, and is enclosed in high-impact resistant, thermoplastic NEMA 4X watertight, corrosion-resistant surface-mount enclosure. Also features single-stage, electronic temperature control with a Single-Pole, Double-Throw (SPDT) output relay and lockable front-panel touchpad for setup and adjustment, wide temperature differential adjustment range (1 to 30° F) to allow the user to set a precise (1° F) temperature differential from 1 to 30F°, adjustable anti-short cycle delay (0 to 12 Minutes in 1-Minute Increments) ensures that the output relay remains off for a user-set time delay, which helps avoid hard starts, nuisance overload outages, and unnecessary equipment wear.
Thermo Pump: New Thermo Pump™ is stainless steel with heated, insulated stainless steel casing has 3/4" output and is rated at a maximum of 5 gallons per minute.
Thermo Hose: Our new Teflon™ hose tubing is almost 50% thicker for safer chemical and heat transfer, faster transfer speeds and longer term use. At 120 Watts with self-regulating, high energy efficient coils, our new hoses can heat up more than 2 times faster than our former hoses and use less electricity. Newly designed, custom hose is 8' and triple insulated with a new safety sleeve which makes it lightweight and flexible, yet perfect for SAFE, FAST & Energy Efficient Heating. Our hoses are rated for continuous exposure temperatures of 250° F (121°C), but since our digital controllers limit temperature to a maximum of 212° F (100°C), degrees you have even extra protection and extended life. Hoses are wired with parallel circuit, low watt density electric heating with a conductive polymer core that with our sensors regulate heat output to prevent overheating, hot spots or causing burn outs in response to changes in surface and ambient temperatures. All hoses have a dielectric strength over 2000 volts and have internal stainless steel overbraid for additional mechanical protection and a low resistance path to ground as required by NEC 427-23.
Boom & Swivel:
Boom 58" High, 1" X 1" Squared, Stainless Steel with Squared welded base for safe mounting with screws (included). Swivel: 28" Long, 1" X 1" Squared, Stainless Steel tubing with 360° turning radius and sliding hose balancer positioner for increased flexibility. Hose Balancer: Special 8' long, lightweight STEEL cable with stainless steel spring edge in heavy duty aluminum housing maximizes safety, flexibility and long product life even in the most industrial environments.
ELECTRICAL: Maximum(*) if on full capacity: 120V/60HZ, 165 Watts, 2.5 Amps. *Hose can heat up to 250° F but temperature keeps it below 212° F/ 100° C at all times.