Integrated Processing Technology
Industrial Beeswax & Honey Separation & Clarification Systems
WaxMelters designs integrated heated systems for melting,
settling, separating, filtering and dispensing beeswax,
honey, water and process debris.
One system replaces multiple processing steps.
1
Melt
Controlled heating
2
Separate
Natural settling
3
Filter
Remove debris
4
Dispense
Controlled draw-off
Selection Guide
Model 10–35: small-batch and entry production
Model 50–75: commercial processing and growing operations
Model 100–150: high-volume processing
Multi-Stage Processing in One Tank
- Melt beeswax or heat honey to controlled temperatures
- Allow wax, water and heavier material to separate into layers
- Use multiple discharge levels for controlled draw-off
- Filter material during discharge
- Maintain processing or holding temperature
- Transfer or dispense material downstream
Dual-Level Controlled Discharge
Upper and lower discharge points allow the operator to draw
from different material layers during settling and separation.
- Upper discharge for floating wax or upper material layers
- Lower discharge for water and heavier settled phases
- Improved process control during separation
- Reduced handling between processing stages
Integrated Filtration
Filtration can be incorporated at discharge to capture
suspended debris before material proceeds to storage,
molding, transfer or filling.
The difference:
a tank primarily heats material. These systems
are configured around the entire processing sequence —
heating, settling, separation, filtration and controlled discharge.
