 |
 |
 |
|
Built for Production. Designed to Scale.
The PRIMO 7500 is an industrial stainless steel melting system engineered for large industrial production environments. It gives manufacturers reliable, consistent performance without the inefficiencies of traditional water-jacket systems.
Why PRIMO Systems Outperform Traditional Melters:
- 2–3X Faster Melting than conventional systems
- Up to 50% Lower Energy Costs
- Waterless Design — no water maintenance, no corrosion, less downtime
- Even Heat Distribution — controlled heating for consistent production
- Digitally Controlled Temperature for repeatable processing
Provides significantly more usable capacity than typical “7500 lb class” tanks, reducing refill frequency and increasing daily output.
Industrial Construction:
- High-grade 304 stainless steel with #4 finish
- Double-walled insulated tank
- Rounded interior for easy cleaning
- Permanent heating system designed for long service life
Designed For:
Wax • Candles • Cosmetics • Cannabis/CBD • Food • Adhesives • Industrial Materials
Included:
Stainless steel lid, valve configuration as selected, and heated spout/valve system for improved dispensing.
Planning to Grow?
Most customers choose a larger system than they currently need. PRIMO melters can run at partial capacity, allowing you to scale production without replacing equipment later.
In many cases, purchasing one larger unit costs less than buying multiple smaller systems over time.
Trusted by manufacturers nationwide and worldwide for reliable industrial thermal processing equipment.
- 100% US Steel Free From Mercury, Lead and Radiation
- Approximate Capacity: 7500 lbs (3402kg), 950 Gallon (3600L)
Provides significantly more usable capacity than typical “7500 lb class” tanks, reducing refill frequency and increasing daily output.
- Inner Dimensions= 68"(173cm) Diameter x 60" (153cm) Deep
- Outer Dimensions= 72"(183cm)L x 72"(183cm)W x 62"(157cm)H
- Double-walled Insulated Metal shell is heat and impact resistant, while offering structural stability.
- Round Inner Surface For Easy Cleaning is High-Grade, US 304 Stainless Steel with #4 Finish so it is easy to clean, rust proof and will provide years of service.
- Fully Insulated with Energy Star qualified insulation.
- Stainless Steel lid with knob/handle.
- 1" (2.54cm) Stainless Steel Valve/Spout
- 1" (2.54cm) Brass Ball Valve
- Digital Control Panel
- Framed, Hinged Access Panel: High-impact 16 gauge steel door with frame.
- Digital Temperature Controller: Easy to read and use 4-digit 7-Segment LED to provide accurate, precise heating from -0° to 212° F/ 100 ° C, with On/Off status, easy fingertip-touch pad which has lockable feature and allows easy set up and adjustment of control set-point, differential, and other functions.
- Illuminated Power buttons.
- Reset breaker/fuses.
- Electrical Specifications:
- STANDARD:0-212F/32-100C
- 10800W
- 50amps at 240v
- 240v
- X-Treme: 0-300F/32-148C
- 13400W
- 62amps at 240v
- 240v
- XX-Treme: 0-400F/32-204C
- 13400W
- 62amps at 240v
- 240v
- LOW Temp: 0-120F/32-49C: Fast, Safe & Precise Melting Up To 120F/49C (Can slowly heat to 212F/100C if needed)
- 10800W
- 50amps at 240v
- 240v
How the PRIMO 7500 Fits Into Your Production
The PRIMO 7500 is built for large industrial production environments that require bulk melting, controlled heating, storage, and transfer capability.
Best Used As:
- Large industrial melting system
- Bulk heated storage tank
- Transfer system supply tank
- High-capacity production processing tank
Choose the Right PRIMO Melter Size
Planning to grow? Many customers choose a larger system than they currently need because PRIMO melters can be run at partial capacity. Starting with the right larger unit often costs less than buying multiple smaller systems later.
Not Sure What Size You Need?
To choose the right PRIMO Melter, estimate:
- How many pounds or gallons you need to melt per batch
- How many batches you run per day
- Your material type and melt temperature
- Whether the melter will feed a filling system, pump, hose, or production line
- Whether you expect production to increase over the next 6–24 months
Simple sizing rule:
Choose a system larger than your current batch size so you have room for expansion and avoid constant refilling.
Example: If you regularly process 75–100 lb batches, consider a PRIMO 150, 250, or larger depending on your growth plans.
Need a sizing recommendation?
Call 888-WAX-MELTERS or send us your batch size, material, melt temperature, and daily output target. Our applications team can recommend the right PRIMO system.
Common Applications
Candle & Wax • Cosmetics & Personal Care • Cannabis/CBD • Food • Adhesives & Hot Melt • Industrial Materials • Aerospace & Investment Casting • Beekeeping & Apiary
Used for melting, heating, holding, and processing materials in controlled production environments.
Need help choosing the right size?
Call 888-WAX-MELTERS or contact our applications team for sizing and configuration recommendations.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Fast, even heating with digital temperature control
- Waterless system — no water jacket maintenance or replacement heaters
- Energy-efficient design reduces operating costs
- 304 stainless steel construction with #4 finish
- Double-walled insulated tank
- Rounded interior for easy cleaning
- Clog-free dispensing with heated valve system
- Built for continuous production use
|
|
|
|
|
|
|
