WaxMelters guarantees the best performance and the highest-quality construction. As the industry-leading US manufacturer of melting and filling equipment, we build for every business size, from startups to factories, in every industry. Heated Transfer, Pumping & Flow Control Systems
Industrial pumps, heated hoses, valves, manifolds and flow-control systems for moving temperature-sensitive or high-viscosity materials between tanks, process equipment and filling or dispensing stations.
What the Equipment Must Do
Select the tank and downstream equipment around the material, operating temperature, working volume, hold time and production cadence—not the industry name alone.
Viscosity at transfer temperature
Select pump, hose and valve size around actual material behavior.
Distance and elevation
Account for hose length, lift and pressure loss.
Temperature loss
Prevent the flow path from becoming the cold restriction in the process.
Source vessel
Choose Standard PRIMO, Thermal Conditioning or Rapid-Cycle according to the upstream thermal requirement.
Which PRIMO System Fits This Process?
Recommended starting point: PRIMO Thermal Conditioning. Heated transfer is primarily a pump, hose and flow-control application; the PRIMO tank is the upstream source. Thermal Conditioning is the most common PRIMO pairing when stable viscosity during supply is critical. Standard PRIMO pairs well with transfer after straightforward melting. Rapid-Cycle pairs well with transfer when repeated replenishment and fast recovery are required to keep the line supplied.
Melting & Production Holding
Standard PRIMO
Pair with transfer when the upstream task is primarily melting and batch heating.
View Standard PRIMO Melters →
RECOMMENDED STARTING POINT
Controlled Heating & Extended Holding
PRIMO Thermal Conditioning
Best pairing when material must remain at stable viscosity during extended supply to a downstream process.
View Thermal Conditioning Systems →
Recovery Speed & Production Throughput
PRIMO Rapid-Cycle
Pair with transfer when rapid recovery is needed to maintain supply through repeated loads or high draw rates.
View Rapid-Cycle Melters →
Typical Thermal-Process Workflow
- 01
Define viscosity, temperature, flow rate, distance and elevation.
- 02
Select the upstream PRIMO family.
- 03
Configure pump, heated hose, valves and controls as one transfer path.
Have WaxMelters Review the Application
Send the material, starting and target temperatures, working volume, hold time, batch frequency, downstream process and available electrical service. For regulated or sanitary processes, also include required surface finish, fittings, cleaning method and facility standards.
Request an Application Review
Calculate PRIMO Savings
Explore PRIMO Systems
|
|
Trusted By Manufacturers Using Heated Transfer, Pumping & Flow Control Systems
WaxMelters supplies heated transfer, pumping, flow control, melting, holding,
dispensing, and filling equipment to manufacturers that need controlled movement
of waxes, adhesives, coatings, resins, oils, ingredients, cosmetics, polymers,
and specialty heated materials.
DuPont
3M
The Dow Chemical Co.
Eastman Chemical Co.
SC Johnson
P&G
GE
Alcoa
EuroChem
Koppers Performance Chemicals
CRC Surface Technologies
Radiac Abrasives
SurfTec
Thomas Scientific
Paraffin International
Selig
Sonoco
American Packaging
Seaman Paper
Newell Brands
Zippo
Spectrum Crayons & Markers
BakerTitan Adhesives
Liquid Flower
Essential Labs
RainShadow Labs
Vital Body Therapeutics
Food & Ingredient Manufacturers
Cosmetic & Personal Care Producers
Adhesive & Coating Manufacturers
Frequently Asked Questions: Heated Transfer, Pumping & Flow Control
Why choose WaxMelters?
WaxMelters guarantees the best performance and the highest-quality construction. WaxMelters is the industry leader and a US manufacturer of melting, heating and filling equipment for every business size, from startup to factory, and every industry. PRIMO waterless heating gives the best and fastest melting and heating: safe, even heating that melts 2–3X faster using half the electricity. It is the most energy efficient and saves money, time and energy. WaxMelters designs, builds and supports its equipment at 2221 5th Avenue, Unit 3, Ronkonkoma NY 11779, (888) 929-6358.
What heated transfer equipment does WaxMelters make?
Industrial pumps, heated hoses, valves, manifolds and flow-control systems, including the EZ-T dedicated heated transfer systems, for moving temperature-sensitive or high-viscosity materials between tanks, process equipment and filling or dispensing stations.
Which PRIMO tank should feed a heated transfer system?
PRIMO Thermal Conditioning is the recommended starting point when material must stay at stable viscosity during extended supply. Standard PRIMO pairs well with transfer after straightforward melting, and PRIMO Rapid-Cycle pairs well when repeated replenishment and fast recovery keep the line supplied.
What determines the right pump, hose and valves?
Viscosity at transfer temperature, hose length and elevation, temperature loss along the flow path, and the upstream source vessel. WaxMelters configures the pump, heated hose, valves and controls as one transfer path.
What materials can WaxMelters transfer systems move?
Waxes, adhesives, coatings, resins, oils, ingredients, cosmetics, polymers and other specialty heated materials.
|
|
|
