Wax Dipping, Coating, Impregnation & Casting Equipment
Industrial heated tanks and systems for dipping, immersion, coating, impregnation and casting with waxes and other compatible temperature-controlled process materials.
What the Equipment Must Do
Select the tank and downstream equipment around the material, operating temperature, working volume, hold time and production cadence—not the industry name alone.
Bath stability
Maintain coating or immersion material at repeatable temperature and viscosity.
Product heat load
Account for cold parts or products entering the bath.
Geometry and immersion
Size vessel dimensions around the actual part, rack, basket or dipping depth.
Cycle rate
Use recovery-focused heating when repeated loads pull the bath below target temperature.
Which PRIMO System Fits This Process?
Recommended starting point: Standard PRIMO. For wax dipping, coating and casting, Standard PRIMO or a purpose-built dip/coating tank is the normal starting point when the bath primarily needs melting and stable heat. Thermal Conditioning fits sensitive coatings or materials requiring extended controlled holding. Rapid-Cycle is especially relevant when repeated cold parts or loads cause temperature drop and recovery time limits cycle rate.
RECOMMENDED STARTING POINT
Melting & Production Holding
Standard PRIMO
Use for general wax melting, coating baths and casting material supply where normal production holding is sufficient.
View Standard PRIMO Melters →
Controlled Heating & Extended Holding
PRIMO Thermal Conditioning
Choose for temperature-sensitive coating materials requiring stable viscosity and gentler extended holding.
View Thermal Conditioning Systems →
Recovery Speed & Production Throughput
PRIMO Rapid-Cycle
Choose when repeated cold loads create significant temperature drop and fast recovery is central to cycle time.
View Rapid-Cycle Melters →
Continuous Fabric, Yarn & Web Coating
For continuously fed flexible materials:
WaxMelters builds custom heated immersion and roll-to-roll systems for
fabric, textiles, yarn, thread, cord, paper, film, nonwovens, and other
compatible web materials. Systems may include guide and immersion rollers,
circulation, wiping or squeeze controls, cooling distance, unwind stands,
and manual or powered take-up equipment.
View Continuous Coating Systems
Typical Thermal-Process Workflow
- 01
Size the vessel around part geometry and immersion depth.
- 02
Calculate the heat load from repeated product entry.
- 03
Select standard, conditioning or rapid-recovery heating around the actual cycle.
Have WaxMelters Review the Application
Send the material, starting and target temperatures, working volume, hold time, batch frequency, downstream process and available electrical service. For regulated or sanitary processes, also include required surface finish, fittings, cleaning method and facility standards.
Request an Application Review
Calculate PRIMO Savings
Explore PRIMO Systems
|
|
Trusted By Manufacturers Using Wax Dipping, Coating, Impregnation & Casting Equipment
WaxMelters supplies industrial dipping, coating, impregnation, immersion,
casting, melting, and thermal processing equipment to manufacturers working
with foundry wax, jewelry wax, dental wax, bottle sealing wax, paper coatings,
textiles, leather compounds, sports waxes, and specialty coating materials.
Thomas Scientific
Atlantis
Zippo
Spectrum Crayons & Markers
Seaman Paper
American Packaging
Sonoco
Ripley's Believe It or Not
P&G
Alcoa
Radiac Abrasives
CRC Surface Technologies
Bloomaker
Holland Bulb Farms
Enviro-Log
Jewelry & Foundry Manufacturers
Bottle Sealing & Packaging Producers
WaxHands & Specialty Product Manufacturers
Paper & Textile Coating Facilities
Sports Wax & Specialty Product Manufacturers
Industrial Thermal Coating Operations
|
|
|
