Home > SHOP BY INDUSTRY > Composite, Resin & Polymer Processing

Composite, Resin & Polymer Processing Equipment

Thermal-processing systems for resins, polymers, elastomers, wax-polymer blends, composite materials, specialty compounds and other high-viscosity or process-sensitive engineered materials.

What the Equipment Must Do

Select the tank and downstream equipment around the material, operating temperature, working volume, hold time and production cadence—not the industry name alone.

Processing window

Maintain temperature and viscosity within the material’s usable range.

Thermal history

Control heating and hold conditions to reduce unnecessary exposure.

High-viscosity transfer

Coordinate vessel, valve, pump and hose selection around flow resistance.

Batch demand

Match recovery capability to production cadence and downstream consumption.

Which PRIMO System Fits This Process?

Recommended starting point: PRIMO Thermal Conditioning. For many resin, polymer and composite workflows, PRIMO Thermal Conditioning is the preferred starting point because maintaining a stable processing window and viscosity is critical. Standard PRIMO is appropriate for compatible solid feedstocks or wax-polymer materials that primarily need melting. Rapid-Cycle fits compatible repeated-batch processes where recovery speed is a defined throughput constraint.
Melting & Production Holding

Standard PRIMO

Choose for compatible solid feedstocks, wax-polymer blends and materials whose primary requirement is melting.

View Standard PRIMO Melters →
RECOMMENDED STARTING POINT
Controlled Heating & Extended Holding

PRIMO Thermal Conditioning

Primary choice for resins and process-sensitive materials that must remain within a stable viscosity and temperature window.

View Thermal Conditioning Systems →
Recovery Speed & Production Throughput

PRIMO Rapid-Cycle

Choose when compatible materials are loaded repeatedly and recovery between batches limits production output.

View Rapid-Cycle Melters →

Continuous Coating & Impregnation for Flexible Reinforcements

For roll-fed or continuously guided substrates: WaxMelters builds custom heated immersion and roll-to-roll systems for fabric, fiber, yarn, cord, nonwovens, tapes, and other compatible flexible reinforcements. Systems can be configured around reviewed waxes, resins, polymers, and specialty compounds, with options for controlled immersion, circulation, wiping or squeeze rollers, cooling or setting distance, and manual or powered take-up.

View Continuous Coating & Impregnation Systems

Choosing a PRIMO Process Tank?

See how PRIMO waterless thermal processing works, including its heat-transfer path, permanent heating systems, connected power, actual energy use, footprint, maintenance and long-term process fit.

How PRIMO Waterless Heating Works Energy Efficiency & Melt Rate Guide

Typical Thermal-Process Workflow

  1. 01

    Melt or condition the material.

  2. 02

    Maintain the validated processing window during hold.

  3. 03

    Use heated transfer and dispensing sized for viscosity and downstream demand.

Resin, Polymer & Elastomer Application Heated Transfer Mixing & Blending Explore PRIMO Families

Have WaxMelters Review the Application

Send the material, starting and target temperatures, working volume, hold time, batch frequency, downstream process and available electrical service. For regulated or sanitary processes, also include required surface finish, fittings, cleaning method and facility standards.

Request an Application Review Calculate PRIMO Savings Explore PRIMO Systems