PRIMO Industrial Wax Melters
PRIMO Wax Melters & Production Melting Tanks
Waterless stainless-steel melting systems engineered for efficient wax melting,
dependable batch recovery and controlled heated holding in production environments.
Built Around Wax Production
Efficient Melting Without a Conventional Water Jacket
PRIMO Wax Melters are designed around the heating requirements of wax production:
melt solid feedstock efficiently, recover between batches and maintain usable
material temperature for pouring, pumping, filling or transfer.
Production Melting
Designed for blocks, slabs, flakes, pellets, pastilles and other compatible
solid wax feedstocks.
Batch Recovery
Heating systems are matched to vessel geometry and production requirements
to support dependable melting and recovery.
Heated Holding
Once melted, material can be maintained at the required process temperature
for pouring, pumping, transfer or filling.
Quick PRIMO Model Sizing
Find Your Current Fit & Growth Fit
Enter the production requirement you run today.
The calculator provides a current-fit starting point
and a larger growth-oriented PRIMO class.
Planning tool only. Final equipment selection should also consider
material behavior, practical headspace, heating or recovery requirements,
available electrical service and downstream production demand.
PRIMO Facility Efficiency
More Process. Less Infrastructure.
Standard PRIMO combines a round product-contact vessel with a compact insulated exterior envelope on many models, creating a predictable equipment footprint while eliminating the conventional heated-water jacket.
Predictable Footprint
Published outside dimensions make it easier to plan floor layouts, aisles, transfer equipment and future expansion.
Connected Heating Power
Compare installed kW with the process capacity it supports—not purchase price alone.
Waterless Architecture
No separate heated-water reservoir to fill, heat, maintain or allocate space around.
Capacity Density
Compare pounds or gallons of usable process capacity per square foot of installed equipment.
|
|
One PRIMO Platform Across Many Wax Processes
Candle & Industrial Wax
- Soy wax
- Paraffin wax
- Blended candle waxes
- Microcrystalline wax
- Casting and packaging waxes
Specialty Wax Applications
- Beeswax
- Cheese and food-contact wax coatings
- Depilatory wax
- Cosmetic and skincare waxes
- Compatible industrial wax compounds
Standard Construction
Built for Production and Configured Around the Application
Stainless Product Contact
PRIMO vessels use stainless-steel product-contact construction suitable for
compatible wax, food-contact, cosmetic and industrial applications.
Process Options
Systems can be reviewed for mixing, pumps, valves, heated hoses, filtration,
dispensing, filling and other downstream equipment.
Cleanability Options
Smooth-ground welds, enhanced sanitary finishing, special fittings and other
cleanability requirements are available when the process or plant standard requires them.
Common Questions
PRIMO Wax Melter FAQ
Is a standard PRIMO food-grade construction?
Standard PRIMO equipment uses stainless-steel product-contact construction
and is used in compatible food-contact, beeswax, honey, cosmetic and industrial applications.
Specific sanitary finishes or plant requirements should be reviewed separately.
Does beeswax require Thermal Conditioning?
No. Beeswax is commonly processed in standard PRIMO melting equipment.
Why are candle PRIMO models sized by pounds?
Pound-based capacity is standard buying language in the candle industry.
Gallon capacity may also be shown as a secondary vessel specification.
Can a PRIMO melt and hold in the same vessel?
Yes. Standard PRIMO systems are designed for melting or heating followed by
controlled production holding.
Application Review
Choose the PRIMO Around Your Production Requirement
Send the wax or material, batch size, desired melt time, operating temperature,
daily production and downstream process. We can recommend the appropriate
vessel size and PRIMO configuration.
|
|
|
