 |
 |
 |
|
Built for Production. Designed to Scale.
The PRIMO 12000 is an industrial stainless steel melting system engineered for large-volume industrial manufacturing. It gives manufacturers reliable, consistent performance without the inefficiencies of traditional water-jacket systems.
Why PRIMO Systems Outperform Traditional Melters:
- 2–3X Faster Melting than conventional systems
- Up to 50% Lower Energy Costs
- Waterless Design — no water maintenance, no corrosion, less downtime
- Even Heat Distribution — controlled heating for consistent production
- Digitally Controlled Temperature for repeatable processing
Provides significantly more usable capacity than typical “12000 lb class” tanks, reducing refill frequency and increasing daily output.
Industrial Construction:
- High-grade 304 stainless steel with #4 finish
- Double-walled insulated tank
- Rounded interior for easy cleaning
- Permanent heating system designed for long service life
Designed For:
Wax • Candles • Cosmetics • Cannabis/CBD • Food • Adhesives • Industrial Materials
Included:
Stainless steel lid, valve configuration as selected, and heated spout/valve system for improved dispensing.
Planning to Grow?
Most customers choose a larger system than they currently need. PRIMO melters can run at partial capacity, allowing you to scale production without replacing equipment later.
In many cases, purchasing one larger unit costs less than buying multiple smaller systems over time.
Trusted by manufacturers nationwide and worldwide for reliable industrial thermal processing equipment.
Setting Control on Melting Tank
- 100% US Steel free from Mercury, Lead and Radiation
- Approximate Capacity: 12000 lb (5445kg), 1566 Gallon (5927)
Provides significantly more usable capacity than typical “12000 lb class” tanks, reducing refill frequency and increasing daily output.
- Inner Diameter = 80"(203cm) Diameter x 72"(183cm) Deep
- Outer Dimensions= 84"(213cm)L x 84"(213cm)W x 74"(187cm)H
- Double-walled Insulated Metal shell is heat and impact resistant, while offering structural stability.
- Round Inner Surface For Easy Cleaning is High-Grade, US 304 Stainless Steel with #4 Finish so it is easy to clean, rust proof and will provide years of service.
- Fully Insulated with Energy Star qualified insulation.
- Stainless Steel lid with knob/handle.
- 1" (2.54cm) Stainless Steel Valve/Spout
- 1" (2.54cm) Brass Ball Valve
- Digital Control Panel
- Framed, Hinged Access Panel: High-impact 16 gauge steel door with frame.
- Digital Temperature Controller: Easy to read and use 4-digit 7-Segment LED to provide accurate, precise heating from -0° to 212° F/ 100 ° C, with On/Off status, easy fingertip-touch pad which has lockable feature and allows easy set up and adjustment of control set-point, differential, and other functions.
- Illuminated Power buttons.
- Reset breaker/fuses.
- Electrical Specifications:
- STANDARD:0-212F/32-100C
- 14800W
- 68amps at 220v - 240v
- 240v
- X-Treme: 0-300F/32-148C
- 18000W
- 85amps at 240v
- 240v
- XX-Treme: 0-400F/32-204C
- 18000W
- 85amps at 240v
- 240v
- LOW Temp: 0-120F/32-49C: Fast, Safe & Precise Melting Up To 120F/49C (Can slowly heat to 212F/100C if needed)
- 18000W
- 85amps at 240v
- 240v
- Freight TBD
How the PRIMO 12000 Fits Into Your Production
The PRIMO 12000 supports large-volume industrial manufacturing where controlled heating, bulk storage, and reliable system performance are essential.
Best Used As:
- Large-volume industrial melter
- Bulk heated process tank
- Production storage and transfer tank
- High-capacity plant processing system
Why Manufacturers Choose PRIMO
- Faster melting increases daily output
- Lower energy use reduces operating cost
- Waterless heating eliminates water maintenance issues
- Digital temperature control improves consistency
- Stainless steel construction supports long service life
Scale With Confidence
PRIMO systems are available from small batch melters to large industrial-scale heated tanks. As your production grows, PRIMO systems can be paired with pumps, heated hoses, filling systems, mixers, stands, casters, filtration, and custom configurations.
Choose the Right PRIMO Melter Size
Planning to grow? Many customers choose a larger system than they currently need because PRIMO melters can be run at partial capacity. Starting with the right larger unit often costs less than buying multiple smaller systems later.
Common Applications
Candle & Wax • Cosmetics & Personal Care • Cannabis/CBD • Food • Adhesives & Hot Melt • Industrial Materials • Aerospace & Investment Casting • Beekeeping & Apiary
Used for melting, heating, holding, and processing materials in controlled production environments.
Need help choosing the right size?
Call 888-WAX-MELTERS or contact our applications team for sizing and configuration recommendations.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Fast, even heating with digital temperature control
- Waterless system — no water jacket maintenance or replacement heaters
- Energy-efficient design reduces operating costs
- 304 stainless steel construction with #4 finish
- Double-walled insulated tank
- Rounded interior for easy cleaning
- Clog-free dispensing with heated valve system
- Built for continuous production use
|
|
|
|
|
|
|
