|
Shop Soap Production • Lye / NaOH
PRIMO Waterless Lye / NaOH Tanks
Stainless steel production tanks for preparing, storing and reheating
lye / sodium-hydroxide solutions with digitally controlled
waterless PRIMO heating.
Heat the solution without putting a replaceable heater into it.
Conventional heated lye tanks commonly use an immersion element directly
in the NaOH solution. PRIMO uses a permanent waterless heating system
outside the product-contact area for
repeatable heated holding and reheating.
|
|
|
The Modern Approach to Heated Lye Storage
Set It, Forget It- Automatic Temperature
Master-batched lye can cool between production runs. PRIMO provides
automatic reheating and heated holding without relying on
a conventional immersion heating element or temperature control in lye solution.
Waterless Heating
No jacket-water reservoir and no conventional water-jacket system
to fill, monitor or maintain.
No Immersion Heater in the Lye
The PRIMO heating system does not require a replaceable heating
element immersed directly in the NaOH solution.
Digital Temperature Control
Set the required material-temperature target and allow the controller
to cycle the heating system automatically to maintain the configured range.
Master batch today. Have it ready when production needs it.
Prepare and store lye solution according to your validated process,
then use digitally controlled PRIMO heating when the solution must be
returned to the required production temperature.
|
|
|
