Industrial Wax Removal, Dewaxing & Material Recovery Systems
Heated tanks and custom process systems for removing, melting, draining, separating and recovering wax or thermally removable materials from parts, patterns, tooling, molds and manufactured components.
What the Equipment Must Do
Select the tank and downstream equipment around the material, operating temperature, working volume, hold time and production cadence—not the industry name alone.
Removal mechanism
Determine whether wax is melted out, washed, drained, separated or otherwise thermally released.
Part protection
Set process temperature and handling around the component or tooling.
Recovery
Decide whether removed material is discarded, filtered, clarified or returned to production.
Cycle time
Account for repeated cold loads and required temperature recovery between parts or batches.
Which PRIMO System Fits This Process?
Recommended starting point: PRIMO Rapid-Cycle. Wax removal and dewaxing are not ordinary melting applications, so a dedicated removal system should lead the equipment decision. When a PRIMO-style heated vessel is part of the process, Rapid-Cycle is especially relevant for repeated cold-part or batch loading that demands fast recovery. Standard PRIMO is useful for recovered-wax melting and reprocessing. Thermal Conditioning is useful when reclaimed wax or process material requires controlled holding or clarification.
Melting & Production Holding
Standard PRIMO
Use downstream for melting, reheating or preparing recovered compatible wax for reuse.
View Standard PRIMO Melters →
Controlled Heating & Extended Holding
PRIMO Thermal Conditioning
Use for controlled holding, settling or conditioning of reclaimed material after removal.
View Thermal Conditioning Systems →
RECOMMENDED STARTING POINT
Recovery Speed & Production Throughput
PRIMO Rapid-Cycle
Most relevant PRIMO family for compatible repeated removal/immersion cycles where cold loads create recovery demand.
View Rapid-Cycle Melters →
Typical Thermal-Process Workflow
- 01
Define the removal method and part load.
- 02
Engineer the heated removal vessel around cycle and recovery requirements.
- 03
Separate recovery, filtration and reclaim conditioning into the downstream workflow.
Have WaxMelters Review the Application
Send the material, starting and target temperatures, working volume, hold time, batch frequency, downstream process and available electrical service. For regulated or sanitary processes, also include required surface finish, fittings, cleaning method and facility standards.
Request an Application Review
Calculate PRIMO Savings
Compare PRIMO Systems
