Packaging Adhesive Systems & Hot Melt Labeling Equipment
Thermal-processing equipment for hot melt adhesives, labeling compounds, pressure-sensitive adhesives, wax-based packaging materials, coatings, sealants and other heated packaging-production materials.
What the Equipment Must Do
Select the tank and downstream equipment around the material, operating temperature, working volume, hold time and production cadence—not the industry name alone.
Adhesive viscosity
Keep the material application-ready from melt through dispensing.
Line uptime
Prevent cooling or material starvation from interrupting packaging production.
Continuous supply
Size the heated reserve and transfer path around downstream consumption.
Recovery
Use higher recovery when repeated replenishment otherwise pulls the system below target temperature.
Which PRIMO System Fits This Process?
Recommended starting point: PRIMO Thermal Conditioning. For packaging adhesives and labeling materials, PRIMO Thermal Conditioning is typically the best starting point when stable viscosity and continuous line supply are the priority. Standard PRIMO fits waxes and compatible solid hot-melt feedstocks that primarily need melting. Rapid-Cycle fits operations with frequent replenishment or repeated batch loading where recovery time is slowing the line.
Melting & Production Holding
Standard PRIMO
Use for compatible packaging waxes, sealing waxes and solid hot-melt feedstocks where melting is the primary need.
View Standard PRIMO Melters →
RECOMMENDED STARTING POINT
Controlled Heating & Extended Holding
PRIMO Thermal Conditioning
Primary choice for adhesive conditioning, heated holding and consistent viscosity before pumping or dispensing.
View Thermal Conditioning Systems →
Recovery Speed & Production Throughput
PRIMO Rapid-Cycle
Choose when repeated feedstock loading or batch turnover causes temperature recovery to become the production bottleneck.
View Rapid-Cycle Melters →
Choosing a PRIMO Process Tank?
See how PRIMO waterless thermal processing works, including its heat-transfer path,
permanent heating systems, connected
power, actual energy use, footprint, maintenance and long-term process fit.
Typical Thermal-Process Workflow
- 01
Melt or condition the adhesive/material.
- 02
Maintain a stable heated reserve.
- 03
Transfer through heated pumps, hoses and valves to the packaging or coating point.
