Resin, Polymer, Composite & Elastomer Processing Equipment
Industrial thermal-processing systems for resins, polymers, composites, elastomers, rubber compounds, encapsulants and other engineered materials requiring controlled temperature and viscosity.
What the Equipment Must Do
Select the tank and downstream equipment around the material, operating temperature, working volume, hold time and production cadence—not the industry name alone.
Material window
Operate within the manufacturer-defined temperature and viscosity range.
Thermal exposure
Control hold duration and heating intensity for process-sensitive materials.
High-viscosity handling
Coordinate vessel, agitation, discharge and transfer around flow behavior.
Throughput
Use rapid recovery only where repeated compatible loads justify it.
Which PRIMO System Fits This Process?
Recommended starting point: PRIMO Thermal Conditioning. For resin, polymer, composite and elastomer processing, PRIMO Thermal Conditioning is generally the best starting point because stable viscosity and controlled heated holding are often essential. Standard PRIMO fits compatible solids or wax-polymer feedstocks that primarily need melting. Rapid-Cycle fits compatible repeated-batch processes where recovery speed is a proven throughput constraint.
Melting & Production Holding
Standard PRIMO
Use when compatible solid feedstocks primarily need melting and batch heating.
View Standard PRIMO Melters →
RECOMMENDED STARTING POINT
Controlled Heating & Extended Holding
PRIMO Thermal Conditioning
Primary choice for stable resin/polymer viscosity, controlled process temperature and extended heated holding.
View Thermal Conditioning Systems →
Recovery Speed & Production Throughput
PRIMO Rapid-Cycle
Use when repeated loading of compatible material makes recovery time the limiting step.
View Rapid-Cycle Melters →
Typical Thermal-Process Workflow
- 01
Define the material’s processing window.
- 02
Choose the family around melt, stable hold or recovery.
- 03
Configure mixing, transfer and dispensing around viscosity.
Have WaxMelters Review the Application
Send the material, starting and target temperatures, working volume, hold time, batch frequency, downstream process and available electrical service. For regulated or sanitary processes, also include required surface finish, fittings, cleaning method and facility standards.
Request an Application Review
Calculate PRIMO Savings
Explore PRIMO Systems
