Selecting the Right Dispensing, Filling & Heated Transfer System

Transfer First

Move Material to Another Location

Choose this path when the primary job is tank-to-tank, tank-to-process or continuous material transfer.

• Start with EZ-T for dedicated transfer
• Confirm flow rate and hose length
• Confirm source and destination elevation
• Consider optional transfer capability if you also need filling

Container Filling

Dispense Into Containers or Molds

Choose this path when the job is controlled filling through semi-automatic, automated single-head or multiple-head equipment.

• EZ-1 for flexible operator control
• AutoShot for repeatable single-head filling
• QUATTRO or OCTO for multiple positions

Need Both Functions

Fill Containers and Occasionally Transfer Material

Compatible EZ-1, AutoShot and Pour X-Press systems can add a quick-connect heated transfer connection.

• One heated pump and hose platform
• Container filling during normal production
• Continuous transfer when required
• Confirm transfer rate before ordering

Semi-Automatic

Best for frequent changes, varied containers and direct operator control.

• Start with EZ-1
• Typical 2 to 20 oz container range
• Optional transfer capability

Automated Single-Head

Best for repeatable measured fills and longer standardized runs.

• Start with AutoShot
• 1/8 to 20 oz
• 4 to 45 oz
• 20 to 128 oz
• Optional transfer capability on compatible configurations

Automated Multi-Head

Best when several filling positions increase the output of the complete production line.

• QUATTRO, up to four positions
• OCTO, up to eight positions
• Confirm staging and downstream capacity

Yes, Add Equipment to My Existing Tank

Evaluate EZ-1, AutoShot, QUATTRO, OCTO or EZ-T depending on the end use.

• Confirm valve size
• Confirm tank height
• Confirm operating temperature
• Confirm the tank can supply the required flow

No, I Need Melting + Filling

Choose a Pour X-Press system combining PRIMO melting, heated pumping and filling equipment.

• PX1000 semi-automatic
• PX2000 automated open-frame
• PX3000 automated enclosed
• Optional transfer capability

I Need Melting + Transfer

Size the source tank around material demand and then confirm whether a dedicated EZ-T or another transfer-capable configuration is appropriate.

EZ-1

Semi-automatic handheld filling. Best for flexibility and frequent changes.

AutoShot

Automated single-head filling for repeatable measured production.

QUATTRO

Automated multi-head filling for up to four positions.

OCTO

Automated multi-head filling for up to eight positions.

EZ-T

Dedicated heated transfer when moving material is the primary job.

PX1000

Complete PRIMO melting plus semi-automatic filling.

PX2000

Complete PRIMO melting plus automated single-head filling on an open-frame platform.

PX3000

Complete PRIMO melting plus automated filling in an enclosed mobile configuration.

Material

Material type, viscosity and operating temperature.

Quantity

Smallest and largest measured fill or required continuous transfer rate.

Production

Current output, target output, shift length and changeover frequency.

Existing Equipment

Tank capacity, valve size, tank height, voltage and facility layout.