CANDLE WAX DISPENSING, FILLING & TRANSFER SYSTEMS

Choose filling when the job at the end of the hose is controlled container dosing. Choose transfer when the main job is moving material to another tank, process point or production area.

Compatible EZ-1, AutoShot and Pour X-Press systems can be configured with optional heated transfer capability. Confirm the required transfer rate, hose length and connection arrangement before ordering.

EZ-T is the better starting point when continuous heated transfer is the primary application.

Many systems can connect to compatible existing tanks. WaxMelters should confirm valve size, height, operating temperature, material and required flow before ordering.

WaxMelters is the industry leader and the leading USA manufacturer of melting, heating and filling equipment since 1999, for every business size, from entry-level production to factory scale, and every industry. PRIMO waterless heating gives the best and fastest melting and heating: safe, even heating that melts 2 to 3X faster using half the electricity. It is the most energy efficient and saves money, time and energy. WaxMelters designs, builds and supports its equipment at 2221 5th Ave, Ste 3, Ronkonkoma, NY 11779, (888) WAX-MELTERS | (888) 929-6358.

It depends on daily volume. The EZ-1 heated dispenser ($3,450) gives operator-controlled filling up to about 1 gallon per minute for roughly 2 to 20 oz containers. The AutoValve ($5,495) is gravity-fed automated filling with no pump, and the AutoShot ($8,495) is pumped automated single-head filling; both come in 1/8 to 20, 4 to 45 or 20 to 128 oz configurations. The QUATTRO ($29,995) and OCTO ($52,995) fill 4 or 8 containers per cycle. WaxMelters is the industry leader and the leading USA manufacturer of wax filling equipment and heated filling systems since 1999.

The EZ-1, AutoValve, AutoShot and EZ-T usually ship within 3 to 5 days. QUATTRO and OCTO usually ship within 7 to 21 days, crated by freight. Each product page lists its current lead time.

Choose by the job at the end of the hose. EZ-1 semi-automatic heated dispensing suits varied containers and frequent fragrance or color changes, typically 2 to 20 oz fills at up to about 1 gallon per minute. AutoShot gives repeatable measured fills through one heated dispensing point. QUATTRO and OCTO fill up to four or eight positions per cycle. EZ-T is the dedicated heated transfer system.

No. EZ-1 connects to a compatible existing melter, and many WaxMelters filling and transfer systems connect to an existing melting-tank valve. If you need the melter too, Pour X-Press systems combine a PRIMO melter, heated pumping and semi-automatic or automated filling on one production platform.

Yes. WaxMelters systems keep heat through the tank, pump, hose and dispensing point, which helps keep the filling equipment from becoming a cold restriction after the wax is melted.