 |
 |
 |
|
Waterless Stainless Steel Heated Process System for Controlled Heating & Holding
The PRIMO 15 Gallon Thermal Conditioning System is engineered for controlled thermal conditioning, viscosity management, stable heated holding and process-temperature maintenance.
Capacity / Dimensions / Power
Controlled Heating in a 15 Gallon Stainless Steel Vessel
Vessel capacity is 15 gal (57 L), with an approximate wax reference of 105 lb (47 kg). Inner dimensions are 15" diameter × 20" deep; overall dimensions are approximately 17" L × 17" W × 22" H. Installed heating power is 1,450 W
When Thermal Conditioning Is the Priority
Condition, Stabilize, Hold and Supply
Thermal Conditioning is intended for processes where stable material temperature, viscosity control and extended heated holding are more important than the shortest possible recovery cycle.
Controlled HeatingBring material into the required processing range with digital material-temperature control. Stable Heated HoldingMaintain material in a usable process condition for production. Downstream SupplySupport pumping, transfer, filtration, dispensing, filling or other compatible downstream processes.
Thermal Conditioning Production Role
Heat → Stabilize → Hold → Supply
The objective is controlled material condition over time. Thermal Conditioning systems are selected around vessel volume, temperature range, hold duration, viscosity/flow requirement and downstream production demand.
Material & Process Review
Thermal Conditioning Requirements Are Application-Specific
Provide the material, starting condition, target operating temperature, expected hold duration, agitation or recirculation needs and downstream process. Thermal Conditioning should be selected around the process—not vessel volume alone.
Standard Equipment & Options
Configure the System Around Material Condition
Standard Foundation304 stainless steel vessel, #4 interior finish, insulated double-wall construction, stainless lid, digital material-temperature controller and PRIMO waterless heating. Mixing & CirculationAgitation or recirculation where viscosity, suspended solids or temperature uniformity requires material movement. Transfer & CleanabilityPumps, heated hoses, valves, filtration, washdown-related construction and enhanced weld finishing as required.
Process Data Needed
Information Needed for Thermal Conditioning Sizing
- Material or formulation
- Required vessel volume
- Starting material temperature
- Required operating temperature
- Expected heated hold duration
- Viscosity or flow requirement
- Available voltage, phase and amperage
- Agitation, recirculation, transfer or filling requirements
✓
Factory Tested Before ShipmentEach PRIMO system is inspected and function-tested prior to professional packaging and shipment.
Compare PRIMO Families
Standard PRIMOGeneral melting, heating and production holding. Thermal ConditioningControlled heating, conditioning and extended material-temperature stability. Rapid-CycleRepeated loading and shorter compatible recovery cycles where throughput is the priority.
Request a Thermal Conditioning Review
Technical Specifications
PRIMO 15 Gallon Thermal Conditioning System
15 gal (57 L)Primary vessel capacity
105 lb (47 kg)Approximate wax reference
15" diameter × 20" deepInner dimensions / I.D.
1,450 WInstalled TC power
| Vessel & Construction |
|---|
| Product-Contact Material | 304 stainless steel |
| Interior Finish | #4 stainless finish |
| I.D. / Inner Dimensions | 15" diameter × 20" deep |
| O.D. / Overall Dimensions | 17" L × 17" W × 22" H |
| Construction | Double-wall insulated stainless steel |
| Installed Heating Power | 1,450 W |
| Controller | Digital material-temperature controller |
| Heated Hold Duration | Application-specific |
| Minimum Operating Material Level | Per approved application and operating instructions |
| Agitation / Recirculation | Application-specific |
| Outlet | Configured at purchase to match the process |
| Shipping Weight | Confirm with final configured system |
Production Planning
How the PRIMO 15 Gallon Thermal Conditioning System Fits Into Production
Use this system where 15 gal (57 L) of vessel volume and 1,450 W.
Mix & ConditionAdd agitation or recirculation where viscosity or temperature uniformity requires it. Filter & TransferIntegrate pumps, filtration, heated hoses and valves around actual process requirements. Dispense & FillUse the conditioned material as a stable heated source for downstream production.
Physical Planning
Confirm Footprint, Access and Utilities
DimensionsInner: 15" diameter × 20" deep
Outer: 17" L × 17" W × 22" H Before InstallationConfirm operator access, loading method, outlet height, downstream-equipment location, voltage, phase and amperage.
|
|
|
 |
|
 |
|
