★ BBB A+ Rated ★Online since 1999Serving 40+ Industries(888) WAX-MELTERS | (888) 929-6358Pay an InvoiceEN ES
WaxMelters logoWAXMELTERSThermal Process Equipment 0Cart
Buy NowCart 0Checkout

Filling Systems Troubleshooting

Guided troubleshooting

Filling Systems

Pick the symptom, try the steps and video from your manual, then tell us if it worked. Still stuck? Send it to our factory team from the same page.

Urgent? Call (888) WAX-MELTERS | (888) 929-6358

See It in Action

Real WaxMelters equipment in production: tap to play

Trusted by

NASA logoFender logoBlue Origin logoYamaha logoJim Beam logoMaker's Mark logo3M logoDuPont logoLockheed Martin logoGeneral Electric logoHoneywell logoSiemens logo

Reviews

  • ★★★★★We purchased our PRIMO Melter and EZ system from Melting & Filling Equipment for our ointment and... Rowena, Herbs From Wales, UNITED KINGDOMRead more
All reviews

Combo setup? Add another unit to this request

02

Filling Systems

EZ-1, EZ-T, AutoShot, AutoValve, QUATTRO, OCTO, HVISC and heated hoses

Safety first: Turn the unit off, disconnect it, and allow it to cool completely before inspection, cleaning, valve service, or troubleshooting. Stop immediately for smoke, burning odor, uncontrolled heating, repeated protection-device operation, exposed wiring, or leakage near electrical components.

AWhich equipment?
BWhat is happening?

Filling systems troubleshooting

Restore Fill Condition Before You Replace a Pump

Use the guided tool above for fillers. Slow or uneven fills usually mean the hose or head cooled - viscosity rose at the dispense point.

01

No / Slow Flow

Confirm hose heat, head heat and tank setpoint first.

02

Uneven Weights

Check staging, timer/shot settings and material temperature.

03

Clogs

Clean path per manual; residue raises effective viscosity.

04

Combo Setups

Select melter + filler together in the tool when they chain.

Process temperature and viscosity

What Viscosity Means Here

Fill Condition = temperature and viscosity stable at the dispensing point. A hot tank with a cold hose still fails.

01

What It Is

Thickness at the temperature you melt, hold, dip, transfer or fill.

02

Why Heat Matters

Heat lowers viscosity so material moves without setting in the path.

03

What We Size

Tank, filler, voltage and hose path around viscosity at operating temperature.

Tools above stay interactiveUSA built since 1999 · BBB A+

Next Step

Complete the guided steps above before requesting a factory evaluation.