 |
 |
 |
|
Automate the Filling Step & Keep Control of the Process
AutoShot replaces repetitive manual dispensing with a programmable, heated single-head filling system. Set the desired fill cycle, stage the container and let the controller repeat the dosing sequence without requiring an operator to hold a trigger for every pour.
It is a strong fit for candle production, wax products and other heated oils where fill consistency, cleaner changeovers and one-person operation matter. Select the dispenser range around your container sizes and configure hose length, pump and transfer options around the way your floor actually works.
Best fit
repeatable container filling, mixed production runs, candle jars, molds and other heated wax or oil applications that already have a compatible melter.
Practically Self CleaningAlmost cleans itself. Changing fragrance, color or product is close to automatic. Close the ball valve and run the pump until the system is empty. A little material stays along the lining, which is normal. The system is fully heated and built from stainless steel and Teflon, so on your next batch you preheat, open the valve, run the new material through and discard the first few ounces. That is it. Nothing comes apart. Not the pump, not the hose, not the filling head.
System type
Automated heated single-head filling / dosing system
Fill range options
1/8–20 oz • 4–45 oz • 20–128 oz
Operating modes
Single measured shots or repeating on/off cycles
Process temperature
Current standard configuration limited to 212°F / 100°C
Filling-system power
450 W
Electrical
120 V at 4 A or 240 V at 2 A; 480v & 600v configuration available
Tank connection
Standard 1-inch valve connection; alternate fittings available
Heated hose
Stainless-braided PTFE/Teflon® core; hose length selected at order
Pump
Heated, insulated stainless-steel pump assembly rated for continuous use
Boom & Hose Support
360° swivel boom with hose hammock and zero-gravity hose balancer
Final specifications depend on selected temperature range, viscosity, voltage, hose length and product options. Confirm the configured system requirements before installation.
Why producers move to AutoShot
The value is not simply speed. It is repeatability. AutoShot turns the fill point into a controlled production step so the operator can focus on staging containers, checking quality and keeping the line moving instead of manually squeezing a trigger for every fill.
Configure it around your containers
Choose the fill-range version based on the smallest and largest container you routinely run. The 3000 range is aimed at smaller fills, the 4500 range at mid-size fills and the 9000 range at larger fills. Hose length and pump options can then be matched to the melter location, material viscosity and desired workflow.
Built for an existing melter
AutoShot is designed to connect directly to a compatible melting tank, making it a practical upgrade when you already have melting capacity but need a more repeatable filling station. For an integrated melting-and-filling platform, use the Pour X-Press 2000 or 3000 family.
Need help configuring the system?
Send your material, operating temperature, smallest and largest fill or transfer quantity, daily output, existing melter information and available electrical service for a production review.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Programmable single precise shots or continuous on/off filling cycles
- Three dispenser ranges: 1/8–20 oz, 4–45 oz and 20–128 oz
- Fully heated, digitally controlled flow path to help maintain material temperature during filling
- Stainless-steel heated pump assembly designed for continuous production use
- Flexible stainless-braided PTFE/Teflon®-core heated hose
- 360 degree swivel boom, hose hammock, zero-gravity supporting hose balancer
- Single-head dispensing keeps the workstation compact and easy to stage
- Compatible with waxes and oils within the selected temperature and viscosity configuration
- Optional high-viscosity pump, variable-speed pump, heated-transfer quick connect and unheated-liquid filling capability
- Connects to a standard 1-inch melting-tank valve; alternate fittings can be supplied when required
- Melter sold separately
|
|
|
|
|
|
|
