Move Molten Wax Without Carrying Pitchers or Moving the Melter
Use a fully heated transfer system to move wax from a bulk melter to a staging tank, filling point, mold area or production line while maintaining flow through the pump, hose and portable valve.
Supply a remote filling point without positioning the main melting tank beside every production table.
Melter to Holding Tank
Stage wax in a smaller heated vessel while the primary tank melts the next batch.
Multiple Production Cells
Move wax between production areas or dedicated fragrance and color stations.
Large Containers or Molds
Bring the heated valve to the destination instead of lifting and carrying hot material.
Mobile Transfer Systems
Four Ways to Move Heated Wax
WaxMelters filling systems connect directly to a compatible PRIMO melter, so transfer is something you add when the job calls for it, not a step every batch has to go through. Pick the setup that matches how much wax moves and how far it goes.
Dedicated Transfer
EZ-T Heated Transfer System
A heated pump, hose and portable ball valve built only for moving material: melter to holding tank, tank to tank or process to process.
Add the $295 Quick-Connect Heated Transfer Kit and the same filler you use for jars can also move bulk wax to a holding tank, mold area or second line.
About 1 to 3 GPM on EZ systems and AutoShot 3000. About 3 to 5 GPM on AutoShot 4500 and 9000.
A PRIMO melter, heated pump and filler on one rolling stainless platform. It melts its own wax, holds it, fills and transfers, so it works as a heated transfer cart that never needs filling from another tank.
PRIMO 50 to 350 lb on PX1000 and PX2000. PRIMO 150 to 1,000 lb on PX3000. Add the transfer kit, or order PX1000 with the EZ-T ball valve for transfer-only work.
The EZ-T connects to a compatible melting-tank valve and is configured for the required transfer speed and hose length. Current WaxMelters options include transfer rates up to approximately 1, 3, 5 or 10 gallons per minute and heated hoses up to 50 feet, depending on the application.
Avoid repeatedly carrying heavy pitchers or moving a large hot tank around the facility.
Maintained Temperature
Heated components help maintain flow through the transfer path rather than allowing wax to cool in an unheated hose.
Production Flexibility
Supply a staging tank, production line or destination located away from the main melting area.
Transfer FAQ
Planning a Heated Wax Transfer System
How long can the heated hose be?
WaxMelters lists heated hose configurations up to 50 feet for certain transfer applications. The correct length depends on temperature, viscosity, flow target, elevation and facility layout.
Can it connect to any tank?
Many tanks can be adapted, but WaxMelters must confirm valve diameter, fittings, tank height, temperature and whether the existing tank can supply the required flow.
Is a transfer system accurate enough for candle jars?
A transfer system is intended primarily to move material. Use a dedicated filling system when repeatable jar dosing or automated fill cycles are required.
Can the system transfer beeswax or high-viscosity blends?
Potentially, but viscosity at the operating temperature and required pump configuration must be reviewed. Send a material data sheet or a detailed description when available.
Show Us the Distance From the Tank to the Destination
Send the wax type, source tank, valve size, hose length, elevation and desired transfer rate. A photo or floor sketch is especially useful.
