 |
 |
 |
|
PRIMO 500 Industrial Wax Melter
Fast, Even, Digitally Controlled Waterless Melting
The PRIMO 500 is a 304 stainless steel industrial wax melter engineered to combine fast melting, even heat distribution, digital temperature control and energy-efficient operation in an insulated production vessel with waterless PRIMO heating.
Capacity: 532 lb (241 kg) • Vessel Capacity: 76 gal (287 L)
Inner Dimensions30" diameter × 25" deep
76 cm diameter × 64 cm deep
Outer Dimensions32" L × 32" W × 27" H
82 × 82 × 69 cm
Standard Heating1500 W
Digital temperature control
Why PRIMO
Speed, Even Heating and Efficiency—Without Excessive Heat Intensity
PRIMO is designed around the complete melting process. The objective is fast production melting while maintaining more controlled heat distribution, repeatable temperature control and low heating demand.
2–3X Faster Using Half the ElectricityPRIMO waterless heating eliminates the need to first heat and maintain a separate water reservoir, allowing usable heat to reach the production vessel more efficiently.
Even, Controlled HeatingPRIMO is engineered to distribute heat around the vessel instead of relying on a high-wattage localized heat source. This helps reduce hot spots and provides more controlled melting and holding.
Half the ElectricityPRIMO melts 2–3X faster using half the electricity while delivering faster melting and production recovery.
Digital Material-Temperature ControlAdjustable digital control maintains repeatable material-temperature setpoints for melting and heated holding without relying on uncontrolled high-intensity heat input.
Why not simply use more direct heat?
Higher-wattage direct-heated pots can transfer heat very quickly, but concentrated heat can also create localized hot surfaces and greater scorching or material-degradation risk. PRIMO is designed for a production balance of speed, even heating, digital control and energy efficiency.
Melt times and energy use vary by material, starting temperature, batch load, ambient conditions, electrical configuration and operating procedure.
More Usable Capacity
PRIMO 500: Extra Usable Capacity Built In
The PRIMO 500 provides approximately 532 lb (241 kg) of wax capacity in a 76-gallon (287 L) vessel.
The vessel is sized around usable production volume and process requirements.
More usable capacity can mean fewer refills, more material available for filling or transfer and additional production flexibility before moving to the next PRIMO size.
Designed For
Production Wax Melting Across Multiple Industries
Candle ManufacturingSoy, paraffin, coconut blends, pillar wax, container wax and other compatible candle-wax formulations.
Beeswax & Food-Contact WaxBeeswax, cheese-coating wax, packaging wax and compatible food-contact wax processes.
Cosmetic & Specialty WaxDepilatory wax, skincare waxes, microcrystalline wax, casting wax and other compatible wax-based materials.
Standard Equipment
What Comes With the PRIMO 500
- 304 stainless steel product-contact vessel
- #4 stainless interior finish
- Double-wall insulated construction
- Stainless steel lid
- Digital temperature controller
- Permanent PRIMO waterless heating system
- Illuminated power controls and electrical protection
- Outlet / ball-valve configuration as selected
- Electrical configuration as selected for the model
- Built for repeated production use
Configure the System
Standard Equipment First—Production Options as Needed
Process & CleanabilityIntended-use review, washdown environment and enhanced smooth-ground interior weld finishing.
Material HandlingAgitation, wax filtration, outlet size, heated valves and downstream transfer requirements.
InstallationVoltage, stand, casters, temperature range and other production-system options where offered for this model.
Operating & Support Resources
Instructions, Controls and Warranty
Nearby PRIMO Sizes
PRIMO 500 and Nearby Sizes
| Model | Capacity | Vessel | Typical Production Fit |
|---|
| PRIMO 250 | 264 lb (120 kg) | 33 gal (125 L) | Regular production manufacturing |
| PRIMO 350 | 367 lb (166 kg) | 49 gal (185 L) | Higher-output / growth-stage production |
| PRIMO 500 | 532 lb (241 kg) | 76 gal (287 L) | Core daily production / filling-system supply |
| PRIMO 750 | 770 lb (349 kg) | 110 gal (416 L) | High-output production / larger batches |
| PRIMO 1000 | 1,226 lb (556 kg) | 158 gal (598 L) | Commercial production / integrated filling lines |
Standard PRIMO, Rapid-Cycle or Thermal Conditioning?
Standard PRIMO is the starting point for most wax-melting applications. Thermal Conditioning is used where gentler long-duration thermal management is the priority. Rapid-Cycle is used when recovery time is restricting output.
Cleaning Your MelterClean it like a high end stainless steel cooking pot. Wipe it out with a cloth. For soap and food products, soap and water works fine. If something has burned on, a scouring pad takes care of it. Round tank, no corners to clean.
Setting Control on Melting Tank
PRIMO 500
Technical Specifications
532 lb (241 kg)
Approximate wax capacity
76 gal (287 L)
Vessel capacity
30" diameter × 25" deep
76 cm diameter × 64 cm deep
Inner dimensions
32" L × 32" W × 27" H
82 × 82 × 69 cm
Overall dimensions
Vessel & Construction
| Product-Contact Material |
304 Stainless Steel |
| Interior Finish |
#4 Stainless Finish |
| Inner Dimensions |
30" diameter × 25" deep
76 cm diameter × 64 cm deep |
| Overall Dimensions |
32" L × 32" W × 27" H
82 × 82 × 69 cm |
| Construction |
Double-Wall Insulated Stainless Steel |
| Lid |
Stainless Steel Lid |
Heating & Controls
| Heating Type |
PRIMO Waterless Heating System |
| Controller |
Digital Material-Temperature Controller |
| Standard Temperature Range |
32–212°F (0–100°C) |
| Standard Heating Power |
1500 W |
| Electrical Service |
110-120v, 220-240v, 480v or 600v configurations available
|
| X-Treme High-Temperature Option |
Optional configuration up to 400f/204c available |
Outlet & Production Features
| Outlet / Valve |
Outlet and ball-valve configuration selected at purchase; size and material may vary by model and application |
| Agitation |
Optional mixing / agitation configurations where available for the model |
| Filtration |
Optional wax filtration configurations where available |
| Support Stand |
Optional stainless steel production stand where offered |
| Mobility |
Optional industrial casters where offered |
| Enhanced Cleanability |
Optional smooth-ground interior welds, washdown and application-specific cleanability features |
Capacity note:
532 lb (241 kg) is an approximate wax capacity. Actual material weight
varies by density, formulation, operating level and required headspace.
Physical vessel capacity is approximately 76 gallons (287 L).
Final electrical service, outlet configuration, high-temperature options and
application-specific accessories should match the selected product configuration.
How the PRIMO 500 Fits Into Your Production
The PRIMO 500 is a core production system for manufacturers running regular daily batches and looking to increase output, efficiency, and consistency.
Best Used As:
- Primary production melter
- Daily manufacturing system
- Batch holding and heating tank
- Melter feeding a filling or transfer system
Why Manufacturers Choose PRIMO
- Faster melting increases daily output
- Lower energy use reduces operating cost
- Waterless heating eliminates water maintenance issues
- Digital temperature control improves consistency
- Stainless steel construction supports long service life
Scale With Confidence
PRIMO systems are available from small batch melters to large industrial-scale heated tanks. As your production grows, PRIMO systems can be paired with pumps, heated hoses, filling systems, mixers, stands, casters, filtration, and custom configurations.
Choose the Right PRIMO Melter Size
Planning to grow? Many customers choose a larger system than they currently need because PRIMO melters can be run at partial capacity. Starting with the right larger unit often costs less than buying multiple smaller systems later.
Common Applications
Candle & Wax • Cosmetics & Personal Care • Cannabis/CBD • Food • Adhesives & Hot Melt • Industrial Materials • Aerospace & Investment Casting • Beekeeping & Apiary
Used for melting, heating, holding, and processing materials in controlled production environments.
Need help choosing the right size?
Call 888-WAX-MELTERS or contact our applications team for sizing and configuration recommendations.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Fast, even heating with digital temperature control
- Waterless system — no water jacket maintenance or replacement heaters
- Energy-efficient design reduces operating costs
- 304 stainless steel construction with #4 finish
- Double-walled insulated tank
- Rounded interior for easy cleaning
- Clog-free dispensing with heated valve system
- Built for continuous production use
|
|
|
|
|
|
|
