 |
 |
 |
|
A Faster Way to Hand Fill From the Melter
EZ-1 keeps the wax in the production system and brings the heated flow path to the container. The operator controls each pour from a lightweight dispensing head, giving you the flexibility of hand filling with less lifting, scooping and pitcher handling.
It is especially useful when container sizes change often, fragrance or color batches change throughout the day, or the operator needs direct control over start, stop and placement. The heated pump and hose help keep material moving at the selected process temperature from tank to fill point.
Best fit
candle shops and industrial users that want flexible semi-automatic filling, frequent changeovers and direct operator control.
Precise, Clean Heated Filling!
Practically Self CleaningAlmost cleans itself. Changing fragrance, color or product is close to automatic. Close the ball valve and run the pump until the system is empty. A little material stays along the lining, which is normal. The system is fully heated and built from stainless steel and Teflon, so on your next batch you preheat, open the valve, run the new material through and discard the first few ounces. That is it. Nothing comes apart. Not the pump, not the hose, not the filling head.
System type
Semi-automatic / operator-controlled heated dispensing
Recommended fill size
Approximately 2–20 oz
Maximum listed flow
Up to 1 gallon / 3.7 liters per minute
Pouring orientation
Horizontal standard • Vertical upgrade • Portable Ball Valve
Process temperature
Up to 212°F/100°C standard configuration
Filling-system power
450 W
Electrical
120 V at 4 A or 240 V at 2 A; 480v & 600v
configuration available
Tank connection
Standard 1-inch valve connection; alternate fittings available
Heated hose
Stainless-braided PTFE/Teflon® core; selectable length
Final specifications depend on selected temperature range, viscosity, voltage, hose length and product options. Confirm the configured system requirements before installation.
Keep the flexibility of hand filling
EZ-1 is intentionally different from an automated dosing machine. The operator decides exactly when to start and stop each pour, making it ideal for mixed container sizes, short runs, prototypes and frequent fragrance or color changes.
Reduce pitcher handling
Moving hot wax by pitcher adds lifting, walking, temperature loss and cleanup. EZ-1 lets the melter stay in place while the heated hose brings the product to the workstation.
Add capability as production grows
The base system can be configured with pump and transfer options so the same production area can evolve as flow rate, viscosity or material-movement needs increase.
Need help configuring the system?
Send your material, operating temperature, smallest and largest fill or transfer quantity, daily output, existing melter information and available electrical service for a production review.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Operator-controlled heated dispensing up to approximately 1 gallon / 3.7 liters per minute
- Recommended for approximately 2–20 oz container filling
- Horizontal filling standard; vertical filling available as an upgrade
- Fully heated pump, hose and dispensing head
- Designed for waxes and oils up to 212°F/100°C in the standard configuration
- Lightweight ergonomic handheld dispensing head with safety lock
- Stainless-steel heated pump assembly designed for continuous use
- PTFE/Teflon®-core stainless-braided heated hose
- Optional high-viscosity pump, variable-speed pump and heated-transfer quick connect
- Connects to a compatible existing melting tank; melter sold separately
|
|
|
|
|
|
|
